Loop powered Sounder-strobe FI700WMSOURSTRR
Back to: Addressable Sounders/Flash

Red Loop Sounder FI700WMMTSOUR

Red Loop powered sounder with LST/700 protocol Argus Security

FI700/WM/MT/SOUR - Loop Powered Sounder with LST/700 protocol ARGUS SECURITY

The red Loop Sounder FI700/WM/MT/SOUR is powered and actuated via the ADM loop with Labor Strauss/700 protocol. The sounders can be activated by a Fire Detection Control Panel Series BC216 with one of the following three tone types, depending on the parameter setup and the system condition:
- Slow Whoop tone according to NEN 2575,
- DIN tone according to DIN 33404,
- Continuous tone 990Hz.
If several sounders are activated at the same time, they are synchronised by the control panel, in order to generate a uniform warning tone. The sound level can be easily adjusted by means of a potentiometer.
The address of the sounders is set in the range 1 to 240 by means of the Programming Unit FI700/PU. Alternatively, the sounder can be addressed automatically if it is connected to a compatible fi re detection control panel.
An integrated dual-isolator disconnects the loop in case of a short circuit. In this way, the undisturbed communication with the loop elements outside the faulty loop section is ensured.
The robust plastic case is equipped with a deep mounting base and is designed for indoor wall mounting.


- ADM loop technology with Labor Strauss/700 protocol
- Can be activated with three different tone types
- Sound level adjustable
- Optionally with protection class IP66
- Low power consumption
- Integrated dual-isolator